MAX3395EETC+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 12-WQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Auto-Direction Sensing, Power Supply Decoupling, Thermal-Shutdown Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Interface ICs |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3395 |
| Pin Count | 12 |
| Output Type | Open Drain, Push-Pull, Tri-State |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Propagation Delay | 50 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Translator |
| Data Rate | 6Mbps |
| Differential Output | NO |
| Input Characteristics | STANDARD |
| Interface IC Type | LINE TRANSCEIVER |
| Driver Number of Bits | 1 |
| High Level Output Current | -15mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 10mA |
| Receiver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX3395EETC+ Overview
Level translators is embedded in the 12-WQFN Exposed Pad package.A Tube package is used to package it.Level translators uses Open Drain, Push-Pull, Tri-State as the output.Its translator type is Voltage Level.Mounting this electronic component follows the Surface Mount method.There is Bidirectional channel type for this electrical device.Level translators operates at -40°C~85°C TA.Its superior flexibility is achieved by using 1 circuits.0 terminations are used to end transmission lines.The base part number MAX3395 can be used to find its related parts.In order to power the device, a voltage supply of 3.3V is required.Level translators is equipped wLevel translatorsh 12 pin count.12 pins are used in its design.Level translators supports a maximum supply voltage of 5.5V.Level translators operates wLevel translatorsh the minimal supply voltage of 1.65V.In the VCCA supply rail, 1.2V~5.5V is configured.In the VCCB supply rail, 1.65V~5.5V is configured.4 is the number of channels available in the system.Other Interface ICs contains this part.Auto-Direction Sensing, Power Supply Decoupling, Thermal-Shutdown Protection can be ensured when operating.
MAX3395EETC+ Features
12-WQFN Exposed Pad package
1 circuits
12 pin count
12 pins
MAX3395EETC+ Applications
There are a lot of Maxim Integrated MAX3395EETC+ voltage translators & level shifters applications.
- Product Traceability
- ADAS Fusion
- Tablet PCs
- MDIO
- Infotainment Head Unit
- SMBus
- Eliminate Slow or Noisy Input Signals
- LCD Panels Using GIP / GOA / ASG Technology
- Available in Military (-55°C to 125°C)
- Extended Product Life Cycle
