MAX339ETE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX339 |
| Pin Count | 16 |
| JESD-30 Code | S-XQCC-N16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 4.5V~30V ±4.5V~20V |
| Supply Current-Max (Isup) | 0.6mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 6pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 650ns |
| Switch-off Time-Max | 650ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX339ETE+ Overview
The electrical component comes in 16-WQFN Exposed Pad packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 4:1. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. There is an electrical component included in the 16 series. The analog switch ics are built using SP4T switching circuits. A 2 circuit is present in this switch device. Try searching with MAX339 if you're looking for variants. The analogue multiplexer in this example is a typical Multiplexer or Switches. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board.
MAX339ETE+ Features
4 Channels
Switch Circuit: SP4T
MAX339ETE+ Applications
There are a lot of Maxim Integrated MAX339ETE+ Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Audio and video switching
- Sample hold systems
- Digital cross connects (DSX-1)
- MP3 players
- New designs requiring multiplexer functions
- Microwave transmission systems
- DVD-R
- DSUs
- Relay replacements
