MAX34406HETG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 2.222W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX34406 |
| Pin Count | 24 |
| Output Type | Open Drain |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 4 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 30 kHz |
| Gain Bandwidth Product | 30 kHz |
| Supply Current-Max (Isup) | 0.2mA |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX34406HETG+ Overview
Packaged in a 24-WFQFN Exposed Pad case, the buffer op amp is ready to use. This is a Current Sense type op amp. It comes in a Tray case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 24 mark. A total of 24 pins are attached to buffer op amp. This linear amplifier should be powered by an 3.3V battery. Instrumentation amplifier is a part of Other Analog ICs. The buffer op amp includes 24 pins. Op amp ic rates 100μV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using an 200μA supply current, this operational amplifier ics can be operated. On the buffer amps, there are 4 channels that can be used. On the output type, there are Open Drain different types of op amps. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.
MAX34406HETG+ Features
24 Pins
supply voltage of 3.3V
Output Type: Open Drain
MAX34406HETG+ Applications
There are a lot of Maxim Integrated MAX34406HETG+ Instrumentational OP Amps applications.
- pH (acidity)
- Laptop
- Band-stop filter
- earphone
- PDA
- Division circuits
- Blood pressure sensors
- Weak signal detection
- High speed sample
- ECG equipment
