MAX3471CUA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 362mW |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3471 |
| Pin Count | 8 |
| Max Output Current | 130mA |
| Power Supplies | 3/5V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 1.6μA |
| Nominal Supply Current | 1.6μA |
| Data Rate | 64Kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 32mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 2000 ns |
| Out Swing-Min | 0.2 V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX3471CUA Overview
This LED driver IC features an enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package for driving common LEDs.Tube package is used to mount this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 2.5V~5.5V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.With a voltage range of 3.6V, this driver IC can operate efficiently.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.There are 8 pinouts available on this transceiver which are market standard.As the base part number MAX3471 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.8-pin driver chip with enhanced power dissipation.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.This ic receiver provided a 1-bit resolution capability. This receiver is typically specified with a resolution of 1 bits. A rf transceiver module named Line Driver or Receivers belongs to this subcategory.It is designed to be operated from a 3/5V power supply, so the module isolated transceiver will work effectively.It implements 1 transceivers in total.With this integrating circuit you can drive LEDs of a voltage of up to 1.6μA. It can be used to drive large displays.
MAX3471CUA Features
Tube package
8 pin count
8 pins
3/5V power supply
MAX3471CUA Applications
There are a lot of Maxim Integrated MAX3471CUA Drivers/Receivers/Transceivers applications.
- Single to Multimode Fiber Conversion
- Satellite communication
- Laser diode bonding
- interconnection between computers
- Televisions
- Bar, KTV wireless entertainment
- Notebook
- Wired telephone
- Satellite communications networks
- Wireless 3D game
