MAX3485EESA+T
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX3485 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Supply Current-Max | 2.2mA |
| Data Rate | 12Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Transmit Delay-Max | 35 ns |
| Output Low Current-Max | 0.0025A |
| Out Swing-Min | 1.5 V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
MAX3485EESA+T Overview
This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.There is a Tape & Reel (TR) package for this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 3V~3.6V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.ICs that are packaged with market standard pinouts are available on the market.For more variants of this part, try searching with the base part number MAX3485, which indicates the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 8 pins.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.This driver IC is designed to operate from a 3.3V power supply.There should be enough current supplied to the VCC pin of the part, but not more than 2.2mA.
MAX3485EESA+T Features
Tape & Reel (TR) package
8 pin count
8 pins
3.3V power supply
MAX3485EESA+T Applications
There are a lot of Maxim Integrated MAX3485EESA+T Drivers/Receivers/Transceivers applications.
- Gigabit Ethernet
- 1x/2x Fiber Channel
- Servers
- Sensor reporting
- Wireless teaching
- Wireless smart house
- Portable radio
- Tuner
- High-speed computer links
- Ethernet circuitry
