MAX3490ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX3490 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Supply Current-Max | 2.2mA |
| Data Rate | 10Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Receive Delay-Max | 90 ns |
| Transmit Delay-Max | 35 ns |
| Output Low Current-Max | 0.0025A |
| Out Swing-Min | 1.5 V |
| High Level Input Current-Max | 0.000002A |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX3490ESA+ Overview
LED drivers with the enhanced 8-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.In the Tube package, this receiver is mounted.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Surface Mount-type PCB or development board, you can install this wide receiver.This differential driver requires a 3V~3.6V power supply.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?IC receiver is designed for applications with a temperature of -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 3.3V.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.MAX3490 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.This is a 8-pin driver IC with enhanced power dissipation control.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There is usually a 1-bit resolution specified for this receiver when it is used.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.Driver ICs are designed to work with a 3.3V power supply and this driver IC is one of them.It is important to supply enough input current to the VCC pin of the ic receiver, but not exceeding 2.2mA.
MAX3490ESA+ Features
Tube package
8 pin count
8 pins
3.3V power supply
MAX3490ESA+ Applications
There are a lot of Maxim Integrated MAX3490ESA+ Drivers/Receivers/Transceivers applications.
- Wired telephone
- Metro access rings
- Automation systems
- Interconnection between switches and computers
- Clock radio
- Fiber optic cable connection network
- IPTV front end
- Desktop radio
- Gigabit Ethernet
- Satellite communications networks
