Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.209, 5.30mm Width) |
Surface Mount |
YES |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1999 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
MAX349 |
Pin Count |
20 |
JESD-30 Code |
R-PDSO-G20 |
Qualification Status |
Not Qualified |
Power Supplies |
3/5/+-5V |
Number of Channels |
8 |
Number of Circuits |
1 |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±2.7V~8V |
Supply Current-Max (Isup) |
0.03mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
On-State Resistance (Max) |
100Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
2pF 2pF |
On-state Resistance Match-Nom |
16Ohm |
Switch Time (Ton, Toff) (Max) |
275ns, 150ns |
Charge Injection |
1pC |
Channel-to-Channel Matching (ΔRon) |
16 Ω (Max) |
Crosstalk |
-90dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
400ns |
Switch-off Time-Max |
300ns |
Signal Current-Max |
0.03A |
Length |
7.2mm |
Width |
5.29mm |
RoHS Status |
ROHS3 Compliant |
MAX349CAP+T Overview
As the electronic part is packed in 20-SSOP (0.209, 5.30mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 8:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around 0°C~70°C TA. In total, there have been 20 terminations. A electrical component with 8 channels is capable of high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 20 pins. This multiplexer is composed of 1 circuits. Use MAX349 to search for variants of the digital switches. There is Multiplexer or Switches analog multiplexer like this in the world. Integrated with SINGLE-ENDED MULTIPLEXER analog IC.
MAX349CAP+T Features
8 Channels
MAX349CAP+T Applications
There are a lot of Maxim Integrated MAX349CAP+T Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- T1/E1 Terminals
- PBXs
- RGB switches
- Relay replacements
- Avionics test equipment
- Industrial and process control systems
- Audio and video switching
- PDAs
- DVD-R