MAX349CPN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX349 |
| Pin Count | 18 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 4.572mm |
| Length | 22.86mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MAX349CPN+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 18-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 8:1. Extended operating temperature around 0°C~70°C TA. Totally, there are 18 terminations. A electrical component with 8 channels is capable of high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. The electrical component body receives 18 pins. The circuits in this analogue multiplexer number 1. Try searching with MAX349 to find analog multiplexer variants. For functions related to 18 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Integrated with SINGLE-ENDED MULTIPLEXER analog IC.
MAX349CPN+ Features
8 Channels
MAX349CPN+ Applications
There are a lot of Maxim Integrated MAX349CPN+ Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- USB 1.1 signal switching circuits
- Cable PC
- Sample hold systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- DVD-R
- Microprocessor controlled systems
- Communications systems
- Battery Powered Systems
- Mechanical reed relay replacement
