MAX349CPN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 889mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX349 |
| Pin Count | 18 |
| Operating Supply Voltage | 15V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Throw Configuration | DPST |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 4.572mm |
| Length | 22.86mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX349CPN Overview
As the electronic part is packed in 18-DIP (0.300, 7.62mm), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Through Hole. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operation at a temperature around 0°C~70°C TA. Total terminations are 18. This electronic part offers high-quality output due to its 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 18 pins. The multiplexer consists of 1 circuits. Use MAX349 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 100Ohm. Datasheets for 18 pin functions are available upon request. In normalcircumstances, users should not exceed 16V volts for the multiplexer. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2.7V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 1μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. It is recommended that you attach at least 3V to your dual power supply. It can operate from 15V operating voltages.
MAX349CPN Features
8 Channels
1μA Supply Current
MAX349CPN Applications
There are a lot of Maxim Integrated MAX349CPN Analog Switches & Multiplexers ICs applications.
- HDTV
- Imaging
- Medical Instrumentation
- Avionics and Military Systems
- Industrial control systems
- Optical Applications
- Multi-Line E1 Interface Cards
- Channelized and Unchannelized DS3 applications
- Video signal routing
- Wireless Local Loop
