MAX349EAP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX349 |
| Pin Count | 20 |
| Operating Supply Voltage | 15V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Throw Configuration | DPST |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Signal Current-Max | 0.03A |
| Height | 1.78mm |
| Length | 7.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX349EAP Overview
The electrical component comes in 20-SSOP (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 20. This electronic part offers high-quality output due to its 8 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. This electronic part can be found in the 20 series. The multiplexer consists of 1 circuits. Try searching with MAX349 to find analog multiplexer variants. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. The datasheets for the 20 pins explain the functions. In normalcircumstances, users should not exceed 16V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.7V. This digital switch can be operated with a current of 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. It is recommended that you attach at least 3V to your dual power supply. The electronic component can function from 15V.
MAX349EAP Features
8 Channels
1μA Supply Current
MAX349EAP Applications
There are a lot of Maxim Integrated MAX349EAP Analog Switches & Multiplexers ICs applications.
- Central office
- Digital Cross-Connects
- Battery Powered Systems
- Industrial
- Private Branch Exchange (PBX)
- SDH
- DSLAMs
- High reliability control systems
- FTTH
- SONET
