MAX350CAP+
| Parameters | |
|---|---|
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX350 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5.5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SP4T |
MAX350CAP+ Overview
Shipping overseas is convenient with the electronic component packed in 20-SSOP (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 4:1. Increasing operating temperature to around 0°C~70°C TA. There are 20 terminations totally. As a result of its 4 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5.5V voltage supply. The electronic part body is injected with 20 pins. The analog switch ics are built using SP4T switching circuits. There are 2 circuits in this switch device. Look for analog switch ic variants by searching with MAX350. Datasheets for 20 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC.
MAX350CAP+ Features
4 Channels
Switch Circuit: SP4T
MAX350CAP+ Applications
There are a lot of Maxim Integrated MAX350CAP+ Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Public switching systems
- SDH/SONET multiplexers
- Access Concentrators
- Voice over IP/DSL – Integrated Access Devices, Smart
- Fault Tolerant Systems
- Imaging
- PCMCIA cards
- Relay replacements
- Wireless Local Loop
