MAX350CPN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 889mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX350 |
| Pin Count | 18 |
| Operating Supply Voltage | 15V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Throw Configuration | 4PST |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Signal Current-Max | 0.03A |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX350CPN+ Overview
Packed in 18-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a number of circuits 4:1. Increasing operating temperature to around 0°C~70°C TA. The total number of terminations is 18. A electrical component with 4 channels is capable of high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. The electrical component body receives 18 pins. Multiplexers built on a SP4T switching circuit are built. A 2 circuit is present in this switch device. Search with MAX350 if you are looking for analog multiplexer variants. A 100Ohm internal resistance characterizes this multiplexer. To find out what the functions of 18 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 16V. Dual, Single supply type digital switch with a low cost. A low voltage of 2.7V should be applied to the electronic component. For this digital switch to work, 1μA current would suffice. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 8V. If you are using a dual power supply, you should attach at least 3V. The electrical part can be operated at 15V voltage levels.
MAX350CPN+ Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX350CPN+ Applications
There are a lot of Maxim Integrated MAX350CPN+ Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- High reliability control systems
- Industrial and process control systems
- SONET/SDH ADM
- Precision data acquisition
- Medical
- Wireless Local Loop
- Precision instrumentation
- Battery Powered Systems
- Audio/video switches
