MAX350CPN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX350 |
| Pin Count | 18 |
| JESD-30 Code | R-PDIP-T18 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.03A |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX350CPN Overview
The electrical component comes in 18-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Through Hole. 4:1 is the ratio of multiplexer to demultiplexer circuits. Around 0°C~70°C TA is the extended operating temperature. The total number of terminations is 18. A electrical component with 4 channels is capable of high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 18 pins. The analog switch ics are built using SP4T switching circuits. This multiplexer is composed of 2 circuits. Look for analog switch ic variants by searching with MAX350. The analog multiplexer shown here is a typical Multiplexer or Switches. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module.
MAX350CPN Features
4 Channels
Switch Circuit: SP4T
MAX350CPN Applications
There are a lot of Maxim Integrated MAX350CPN Analog Switches & Multiplexers ICs applications.
- Cable PC
- Signal routing between systems
- ISDN NT1/TA
- Cross Connects
- Battery Powered Systems
- SONET/SDH ADM
- SDH
- Sample hold systems
- MP3 players
- DVD-R
