MAX350CWN+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX350 |
| Pin Count | 18 |
| JESD-30 Code | R-PDSO-G18 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5.5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Length | 11.55mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
MAX350CWN+T Overview
This electronic part is conveniently packaged in 18-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. 4:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around 0°C~70°C TA. Totally, there are 18 terminations. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 5.5V voltage supply. Into the electrical component body are injected 18 pins. A SP4T switching circuit is used to build these analog multiplexers. It consists of 2 circuits. Using the MAX350 search parameter, you can discover variants of the switch. The analog multiplexer shown here is a typical Multiplexer or Switches. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs.
MAX350CWN+T Features
4 Channels
Switch Circuit: SP4T
MAX350CWN+T Applications
There are a lot of Maxim Integrated MAX350CWN+T Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- Voice over IP/DSL – Integrated Access Devices, Smart
- Communication systems
- Cable Modem
- Industrial and process control systems
- 65 V DACs
- Digital access cross connects
- Fiber to the Home
- Microprocessor Controlled Analog Systems
- Fault Tolerant Systems
