MAX350EAP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX350 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5.5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
MAX350EAP+ Overview
Presented in 20-SSOP (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. Total terminations are 20. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 5.5V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 20 pins. On the other hand, analog switches can be constructed using SP4T switching circuits. This multiplexer is composed of 2 circuits. Using the MAX350 search parameter, you can discover variants of the switch. There is 100Ohm internal resistance in this digital multiplexer. To find out what the functions of 20 pins are, please refer to their datasheets. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board.
MAX350EAP+ Features
4 Channels
Switch Circuit: SP4T
MAX350EAP+ Applications
There are a lot of Maxim Integrated MAX350EAP+ Analog Switches & Multiplexers ICs applications.
- MP3 players
- Avionics and Military Systems
- PDH Multiplexers
- SDH
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- SONET
- Fiber to the Home
- FTTH
- Multiplexers
- Communication systems
