MAX350EAP

275ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX350 20 Pins 100pA 5V 20-SSOP (0.209, 5.30mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX350EAP
Package: 20-SSOP (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 182
Description: 275ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX350 20 Pins 100pA 5V 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SSOP (0.209, 5.30mm Width)
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Max Power Dissipation	640mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	MAX350
Pin Count	20
Power Supplies	3/5/+-5V
Number of Channels	4
Interface	Logic
Number of Circuits	2
Max Supply Voltage	16V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	7μA
Throw Configuration	4PST
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2.7V~16V ±2.7V~8V
Supply Type	Dual, Single
Supply Current-Max (Isup)	0.03mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	4:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	16Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	275ns, 150ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	16 Ω (Max)
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Signal Current-Max	0.03A
Height	1.78mm
Length	7.33mm
Width	5.38mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX350EAP Overview

Packed in 20-SSOP (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 20 terminations. A high-quality output is provided by the electrical component's 4 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. A key feature of the 20 series is the inclusion of this electronic part as part of its design. Based on SP4T switching circuits, these analog multiplexers work. 2 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with MAX350 if you are looking for variants. As far as internal resistance is concerned, it has 100Ohm. The datasheets for the 20 pins explain the functions. Multiplexers should not be powered above 16V in normal situations. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended to use 2.7V as the lowest voltage for the electrical part. This multiplexer would work with 1μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. You should attach at least 3V voltage if you are using dual power supply.