MAX350EPN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX350 |
| Pin Count | 18 |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.03A |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX350EPN Overview
Shipping overseas is convenient with the electronic component packed in 18-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Through Hole. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. Total terminations are 18. As a result of its 4 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. Into the electrical component body are injected 18 pins. SP4T switching circuits are used in these analog switch ics. There are 2 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with MAX350. A 100Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 18 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 16V volts for the multiplexer. 2.7V should be the lowest voltage fed to the electronic component. For this multiplexer, dual supply voltage is feasible, but it should not exceed 8V. In the case of dual power supplies, you should connect at least 3V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module.
MAX350EPN Features
4 Channels
Switch Circuit: SP4T
MAX350EPN Applications
There are a lot of Maxim Integrated MAX350EPN Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Sample-and-hold systems
- Power routing
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- DSLAMs
- Microwave transmission systems
- Data Acquisition Systems
- Video signal routing
- USB 1.1 signal switching circuits
- PBX interfaces
