MAX350EWN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX350 |
| Pin Count | 18 |
| Operating Supply Voltage | 15V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Signal Current-Max | 0.03A |
| Length | 11.55mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
MAX350EWN Overview
Packed in 18-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Around -40°C~85°C TA is the extended operating temperature. A total of 18 terminations have been recorded. High-quality output is provided by the electronic component's 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. Electronic part bodies are injected with 18 pins. The analog switch ics are built using SP4T switching circuits. This multiplexer is composed of 2 circuits. Search with MAX350 if you are looking for analog multiplexer variants. This digital multiplexer has 100Ohm internal resistance. Datasheets for 18 pin functions are available upon request. Users should never supply a voltage higher than 16V to a switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. There should be 2.7V voltage fed to the electrical part below 2.7V. For this digital switch to work, 1μA current would suffice. Despite this switch device's dual supply capability, its voltage should not exceed 8V. When using dual power supplies, you should attach at least 3V. It can operate from 15V operating voltages.
MAX350EWN Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX350EWN Applications
There are a lot of Maxim Integrated MAX350EWN Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- High reliability control systems
- Medical systems
- Sample-and-hold systems
- Optical Applications
- Communication systems
- Wireless Local Loop
- Cross Connects
- Industrial control systems
- Digital Cross-Connects
