MAX350EWN+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX350 |
| Pin Count | 18 |
| JESD-30 Code | R-PDSO-G18 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5.5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 275ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 16 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Length | 11.55mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MAX350EWN+T Overview
Presented in 18-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. There is 4:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. A total of 18 terminations have been recorded. This electronic part offers high-quality output due to its 4 channels. A 5.5V voltage supply should turn on and run the electronic component. 18 pins are injected to the electronic part body. A SP4T switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Try searching with MAX350 to find analog multiplexer variants. There is Multiplexer or Switches analog multiplexer like this in the world. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER.
MAX350EWN+T Features
4 Channels
Switch Circuit: SP4T
MAX350EWN+T Applications
There are a lot of Maxim Integrated MAX350EWN+T Analog Switches & Multiplexers ICs applications.
- DSUs
- Central office
- Audio and video signal routing
- E1 Multiplexer
- Audio and video routing
- Frame Relay Equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- SDH
- Multi-Line E1 Interface Cards
- Microprocessor Controlled Analog Systems
