MAX354CWE+
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 350Ohm |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX354 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 300μA |
| Throw Configuration | DPST |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 250 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~18V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 350Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 100 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 1.6pF 11pF |
| On-state Resistance Match-Nom | 7Ohm |
| Switch Time (Ton, Toff) (Max) | 250ns, 200ns |
| Charge Injection | 80pC |
| Channel-to-Channel Matching (ΔRon) | 7 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.03A |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX354CWE+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.295, 7.50mm Width). In order to provide high reliability, an advanced packaging method Tube is used. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operation at a temperature around 0°C~70°C TA. Totally, there are 16 terminations. A 8 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with MAX354. The internal resistance of this digital multiplexer is 350Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Users should never supply a voltage higher than 36V to a switch device. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 4.5V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 300μA current. Despite this switch's dual supply capability, its voltage should not exceed 18V. With dual power supplies, you should attach at least 4.5V. 28V operating voltages are supported by the electronic component.
MAX354CWE+ Features
8 Channels
300μA Supply Current
MAX354CWE+ Applications
There are a lot of Maxim Integrated MAX354CWE+ Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- Precision instrumentation
- Cable PC
- Switching Systems
- Fault Tolerant Systems
- USB 1.1 signal switching circuits
- Ultrasound
- Low-Voltage
- Remote wireless modules
- Communications systems
