MAX354EPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 350Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX354 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 300μA |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 250 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~18V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 350Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 100 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 1.6pF 11pF |
| On-state Resistance Match-Nom | 7Ohm |
| Switch Time (Ton, Toff) (Max) | 250ns, 200ns |
| Charge Injection | 80pC |
| Channel-to-Channel Matching (ΔRon) | 7 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX354EPE+ Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. In Through Hole, this analog switch is mounted. 8:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 8 channels. An 15V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 16 pins. This multiplexer is composed of 1 circuits. Try searching with MAX354 if you're looking for variants. Internally, this switch multiplexer has a resistance of 350Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. An operating current of 300μA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 18V. A dual power supply should have at least 4.5V voltage attached. 28V operating voltages can be used with this electrical part.
MAX354EPE+ Features
8 Channels
300μA Supply Current
MAX354EPE+ Applications
There are a lot of Maxim Integrated MAX354EPE+ Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- High-Voltage
- USB 1.1 signal switching circuits
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Avionics test equipment
- DSUs
- Video signal routing
- Digital access cross connects
- Central office
- Imaging
