Parameters |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1996 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
15V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
MAX355 |
Pin Count |
16 |
JESD-30 Code |
R-PDIP-T16 |
Qualification Status |
Not Qualified |
Power Supplies |
+-15V |
Number of Channels |
4 |
Number of Circuits |
2 |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±4.5V~18V |
Supply Current-Max (Isup) |
0.5mA |
Neg Supply Voltage-Nom (Vsup) |
-15V |
On-State Resistance (Max) |
350Ohm |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
100 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
1.6pF 5pF |
On-state Resistance Match-Nom |
7Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
250ns, 200ns |
Charge Injection |
80pC |
Channel-to-Channel Matching (ΔRon) |
7 Ω |
Crosstalk |
-92dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
400ns |
Switch-off Time-Max |
300ns |
Signal Current-Max |
0.03A |
Length |
19.175mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX355CPE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Through Hole. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around 0°C~70°C TA extended. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Based on SP4T switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 2. Try searching for the analog switch ic with MAX355 if you are looking for variants. Multiplexer or Switches is a typical switch device. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board.
MAX355CPE Features
4 Channels
Switch Circuit: SP4T
MAX355CPE Applications
There are a lot of Maxim Integrated MAX355CPE Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Medical
- PBXs
- Wireless Local Loop
- Industrial and process control systems
- Precision instrumentation
- Channelized and Unchannelized DS3 applications
- Industrial control systems
- Audio and video routing
- E1 Multiplexer