MAX355CWE+

250ns, 200ns SP4T 350Ohm Analog Switches BREAK-BEFORE-MAKE MAX355 16 Pins 500pA 15V 16-SOIC (0.295, 7.50mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX355CWE+
Package: 16-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 345
Description: 250ns, 200ns SP4T 350Ohm Analog Switches BREAK-BEFORE-MAKE MAX355 16 Pins 500pA 15V 16-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1996
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	350Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	762mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Base Part Number	MAX355
Pin Count	16
Operating Supply Voltage	28V
Power Supplies	+-15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	4.5V
Operating Supply Current	300μA
Throw Configuration	4PST
Propagation Delay	250 ns
Turn On Delay Time	250 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~18V
Supply Type	Dual, Single
Supply Current-Max (Isup)	0.5mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	200 ns
Max Dual Supply Voltage	18V
On-State Resistance (Max)	350Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	100 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	1.6pF 5pF
On-state Resistance Match-Nom	7Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	250ns, 200ns
Charge Injection	80pC
Channel-to-Channel Matching (ΔRon)	7 Ω
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Switch-off Time-Max	300ns
Signal Current-Max	0.03A
Height	2.35mm
Length	10.5mm
Width	7.6mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX355CWE+ Overview

This electronic part is conveniently packaged in 16-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around 0°C~70°C TA. Totally, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. Based on SP4T switching circuits, these analog multiplexers work. It consists of 2 circuits. Try searching with MAX355 if you're looking for variants. As far as internal resistance is concerned, it has 350Ohm. Datasheets for 16 pin functions are available upon request. normally, users should not supply switches with voltages higher than 36V. A cost-effective Dual, Single supply type analogue multiplexer. 4.5V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 300μA would be sufficient for this switch device. For this switch, a dual supply voltage is feasible, but it must not exceed 18VYou should attach at least 4.5V voltage if you are using dual power supply. There is a voltage range of 28V operating voltages for the electrical part.