MAX355CWE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX355 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~18V |
| Supply Current-Max (Isup) | 0.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 350Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 100 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 1.6pF 5pF |
| On-state Resistance Match-Nom | 7Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 250ns, 200ns |
| Charge Injection | 80pC |
| Channel-to-Channel Matching (ΔRon) | 7 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.03A |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX355CWE Overview
Packed in 16-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. The operating temperature is extended to around 0°C~70°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. A SP4T switching circuit is used for these analog switches. A total of 2 circuits make up this switch device. Search with MAX355 if you are looking for analog multiplexer variants. This switch device is a typical Multiplexer or Switches. Integrated with DIFFERENTIAL MULTIPLEXER analog IC.
MAX355CWE Features
4 Channels
Switch Circuit: SP4T
MAX355CWE Applications
There are a lot of Maxim Integrated MAX355CWE Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Video switching
- Access Concentrators
- Fiber to the Home
- Mechanical reed relay replacement
- SDH
- Precision instrumentation
- Relay replacements
- Avionics and Military Systems
- Voice over IP/DSL – Integrated Access Devices, Smart
