banner_page

MAX355EPE

250ns, 200ns SP4T 350Ohm Analog Switches BREAK-BEFORE-MAKE MAX355 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX355EPE
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 988
  • Description: 250ns, 200ns SP4T 350Ohm Analog Switches BREAK-BEFORE-MAKE MAX355 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1996
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 350Ohm
Terminal Finish Tin/Lead (Sn85Pb15)
Max Power Dissipation 842mW
Technology CMOS
Peak Reflow Temperature (Cel) 245
Number of Functions 1
Supply Voltage 15V
Base Part Number MAX355
Pin Count 16
Operating Supply Voltage 28V
Power Supplies +-15V
Number of Channels 4
Number of Circuits 2
Max Supply Voltage 36V
Min Supply Voltage 4.5V
Operating Supply Current 300μA
Throw Configuration 4PST
Propagation Delay 250 ns
Turn On Delay Time 250 ns
Logic Function Multiplexer
Voltage - Supply, Single/Dual (±) 4.5V~36V ±4.5V~18V
Supply Type Dual, Single
Supply Current-Max (Isup) 0.5mA
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 200 ns
Max Dual Supply Voltage 18V
On-State Resistance (Max) 350Ohm
Min Dual Supply Voltage 4.5V
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 100 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 1.6pF 5pF
On-state Resistance Match-Nom 7Ohm
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 250ns, 200ns
Charge Injection 80pC
Channel-to-Channel Matching (ΔRon) 7 Ω
Crosstalk -92dB @ 100kHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 400ns
Switch-off Time-Max 300ns
Signal Current-Max 0.03A
Length 19.175mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MAX355EPE Overview


As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. Through Hole is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. By its 4 channels, the electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX355. This digital multiplexer has 350Ohm internal resistance. Datasheets for functions of 16 pins are available. normally, users should not supply switches with voltages higher than 36V. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 4.5V. In order to operate this switch device, it would need a current of 300μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. If you are using a dual power supply, you should attach at least 4.5V. Operating voltages range from 28V.

MAX355EPE Features


4 Channels
Switch Circuit: SP4T
300μA Supply Current

MAX355EPE Applications


There are a lot of Maxim Integrated MAX355EPE Analog Switches & Multiplexers ICs applications.

  • Mechanical reed relay replacement
  • RGB switches
  • Audio/video switches
  • Cell phones
  • Video signal routing
  • Microprocessor controlled systems
  • Medical
  • Battery-powered systems
  • Precision instrumentation
  • Microwave transmission systems

Write a review

Note: HTML is not translated!
    Bad           Good