MAX358CPE
| Parameters | |
|---|---|
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Max Power Dissipation | 1.28W |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX358 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Throw Configuration | DPST |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
MAX358CPE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Through Hole. 8:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around 0°C~70°C TA. Total terminations are 16. By its 8 channels, the electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 16 series. 1 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX358. In this multiplexer, the internal resistance is 1.8kOhm. For functions related to 16 pins, please refer to the datasheets. Analogue multiplexers of the Dual supply type that are cost-effective. For this digital switch to work, 500μA current would suffice. Despite this switch device's dual supply capability, its voltage should not exceed 18V. If you are using a dual power supply, you should attach at least 4.5V. The electrical part can be operated at 15V voltage levels.
MAX358CPE Features
8 Channels
500μA Supply Current
MAX358CPE Applications
There are a lot of Maxim Integrated MAX358CPE Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- Digital cross connects (DSX-1)
- Transmit
- Avionics and Military Systems
- Signal routing between systems
- Automotive applications
- SDH
- DVD-R
- Battery-powered systems
- Sample hold systems
