MAX358CWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX358 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 500μA |
| Throw Configuration | DPST |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 1.5kOhm |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX358CWE+ Overview
As the electronic part is packed in 16-SOIC (0.295, 7.50mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to 0°C~70°C TA. Total terminations are 16. Due to its 8 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. This electronic part can be found in the 16 series. There are 1 circuits in this multiplexer. Use MAX358 to search for variants of the digital switches. Analog switches have 1.8kOhm internal resistance. Datasheets for functions of 16 pins are available. A voltage higher than 18V should not normally be supplied to the switches. Analogue multiplexers of the Dual supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 4.5V. It would be sufficient to run this analogue multiplexer with 1mA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. If you are using a dual power supply, you should attach at least 4.5V. Operating voltages of 15V are compatible with the electrical part. There is 1.5kOhm resistance between the Drain and Source on this part.
MAX358CWE+ Features
8 Channels
1mA Supply Current
Drain-to-Source resistance: 1.5kOhm
MAX358CWE+ Applications
There are a lot of Maxim Integrated MAX358CWE+ Analog Switches & Multiplexers ICs applications.
- Central office
- Avionics test equipment
- HDTV
- Medical systems
- Modems
- Automatic test equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- 65 V DACs
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Imaging
