MAX358CWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX358 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 1mA |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 2.642mm |
| Width | 7.6745mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX358CWE+T Overview
As the electronic part is packed in 16-SOIC (0.295, 7.50mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around 0°C~70°C TA. Total terminations are 16. A 8 channel electronic part produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 16 pins. The multiplexer consists of 1 circuits. Try searching for the analog switch ic with MAX358 if you are looking for variants. The internal resistance of this digital multiplexer is 1.8kOhm. To find out what the functions of 16 pins are, please refer to their datasheets. Digital switch that provides Dual power at a cost-effective price. It would be sufficient to run this analogue multiplexer with 1mA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. If you are using a dual power supply, you should attach at least 4.5V. This electrical part is compatible with 15V operating voltages.
MAX358CWE+T Features
8 Channels
1mA Supply Current
MAX358CWE+T Applications
There are a lot of Maxim Integrated MAX358CWE+T Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- E1 Multiplexer
- Avionics
- PDH Multiplexers
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- New designs requiring multiplexer functions
- E1 Network Equipment
- Access Concentrators
- High reliability control systems
- Medical systems
