MAX358EWE
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX358 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Current | 1mA |
| Throw Configuration | DPST |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX358EWE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.295, 7.50mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. The electronic part provides high-quality output because it has 8 channels. A 15V voltage supply should turn on and run the electronic component. There are 16 pins injected into the electronic part body. The circuits in this analogue multiplexer number 1. Try searching for MAX358 variants of the analog switch ic. There is 1.8kOhm internal resistance in this digital multiplexer. To find out what the 16 pins do, please refer to the datasheets. The analog switch ic is of the Dual supply type and is cost-effective. Put voltage above 1mA on the multiplexer to cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. With dual power supplies, you should attach at least 4.5V. 15V operating voltages can be used with this electrical part.
MAX358EWE Features
8 Channels
MAX358EWE Applications
There are a lot of Maxim Integrated MAX358EWE Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Microprocessor controlled systems
- Digital cross connects (DSX-1)
- Audio/video switches
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Remote wireless modules
- Digital access cross connects
- Central office
- Avionics and Military Systems
- MP3 players
