MAX358MJE/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 20V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 2mA |
| Turn On Delay Time | 1 μs |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1.5 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Screening Level | MIL-STD-883 Class B |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 5.842mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX358MJE/883B Overview
The electronic component is convenient to ship overseas because it is packed in a 16-CDIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -55°C~125°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 8 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. 1 circuits are used in this analogue multiplexer. Analog switches have 1.8kOhm internal resistance. Datasheets for functions of 16 pins are available. Users should never supply a voltage higher than 20V to a switch device. For this digital switch to work, 2mA current would suffice. If put voltage greater than 18V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 4.5V to your dual power supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. It can operate from 15V operating voltages.
MAX358MJE/883B Features
8 Channels
2mA Supply Current
MAX358MJE/883B Applications
There are a lot of Maxim Integrated MAX358MJE/883B Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- SDH
- Precision data acquisition
- DSLAMs
- Battery Powered Systems
- Audio and video signal routing
- PCMCIA cards
- Battery Powered Instruments
- Signal routing between systems
- Communication systems
