MAX359CPE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX359 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 1mA |
| Throw Configuration | 4PST |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX359CPE Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, this analog switch is mounted. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around 0°C~75°C TA. A total of 16 terminations have been recorded. As a result of its 4 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. 16 pins are injected to the electronic part body. The analog switch ics are built using SP4T switching circuits. The multiplexer consists of 2 circuits. Try searching with MAX359 to find analog multiplexer variants. Analog switches have 1.8kOhm internal resistance. Datasheets for 16 pin functions are available upon request. A analog switch ic that has a cost-effective Dual supply type. For this multiplexer to operate, 1mA current would be sufficient. There is no problem with using dual supply voltage, but it should not exceed 18V. With dual power supplies, you should attach at least 4.5V. The electronic component can function from 15V.
MAX359CPE Features
4 Channels
Switch Circuit: SP4T
1mA Supply Current
MAX359CPE Applications
There are a lot of Maxim Integrated MAX359CPE Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Battery Powered Instruments
- DSLAMs
- Cell phones
- Audio and video signal routing
- Avionics and Military Systems
- Microprocessor Controlled Analog Systems
- Cable PC
- Frame Relay Equipment
- Sample-and-hold systems
