MAX359EWE
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX359 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 500μA |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Width | 7.6745mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
MAX359EWE Overview
This electronic part is conveniently packaged in 16-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. With a 15V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SP4T switching circuits. A 2 circuit is present in this switch device. Search with MAX359 if you are looking for analog multiplexer variants. It has an internal resistance of 1.8kOhm. You can find the functions of the 16 pins in the datasheets. Dual supply type digital switch with a low cost. This multiplexer would work with 1mA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. A dual power supply should have at least 4.5V voltage attached. It can operate from 15V operating voltages.
MAX359EWE Features
4 Channels
Switch Circuit: SP4T
1mA Supply Current
MAX359EWE Applications
There are a lot of Maxim Integrated MAX359EWE Analog Switches & Multiplexers ICs applications.
- Cable PC
- Precision instrumentation
- Power routing
- Battery Powered Instruments
- Avionics
- Automotive applications
- Medical systems
- Digital cross connects (DSX-1)
- Fault Tolerant Systems
- SDH
