MAX359EWE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX359 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 1mA |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Width | 7.6745mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX359EWE+T Overview
Packed in 16-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 4:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 16. High-quality output is provided by the electronic component's 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. This electronic part can be found in the 16 series. SP4T switching circuits are used in these analog switch ics. It consists of 2 circuits. Search with MAX359 if you are looking for analog multiplexer variants. It has an internal resistance of 1.8kOhm. A analog switch ic that has a cost-effective Dual supply type. The analogue multiplexer could operate on 1mA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. With dual power supplies, you should attach at least 4.5V. The electronic component can function from 15V.
MAX359EWE+T Features
4 Channels
Switch Circuit: SP4T
1mA Supply Current
MAX359EWE+T Applications
There are a lot of Maxim Integrated MAX359EWE+T Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Frame Relay Equipment
- Multi-Line E1 Interface Cards
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Power routing
- Modems
- Channel Banks
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Digital Cross-Connects
- Video switching
