MAX359MJE/883B
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 20V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 2mA |
| Turn On Delay Time | 700 ns |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1.5 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Terminal Finish | TIN LEAD |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
MAX359MJE/883B Overview
The electronic component is convenient to ship overseas because it is packed in a 16-CDIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a ratio of 4:1. Around -55°C~125°C TA is the extended operating temperature. 16 terminations have been made so far. This electronic part offers high-quality output due to its 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. A SP4T switching circuit is used for these analog switches. There are 2 circuits in this switch device. In this multiplexer, the internal resistance is 1.8kOhm. Please refer to the datasheets for 16 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 20V voltage to the switch device. In order to operate this switch device, it would need a current of 2mA. Despite this switch's dual supply capability, its voltage should not exceed 18V. If you are using dual power supplies, you should attach at least 4.5V. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. Operating voltages of 15V are compatible with the electrical part.
MAX359MJE/883B Features
4 Channels
Switch Circuit: SP4T
2mA Supply Current
MAX359MJE/883B Applications
There are a lot of Maxim Integrated MAX359MJE/883B Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Medical systems
- Avionics test equipment
- Audio and video switching
- Imaging
- Communication systems
- Battery Powered Systems
- Cellular phones
- Optical Applications
- Fiber In The Loop (FITL)
