Parameters |
Technology |
CMOS |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Base Part Number |
MAX364 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Operating Supply Voltage |
20V |
Power Supplies |
512/+-15V |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
24V |
Min Supply Voltage |
10.8V |
Nominal Supply Current |
100pA |
Max Supply Current |
100pA |
Throw Configuration |
SPST |
Turn On Delay Time |
250 ns |
Voltage - Supply, Single/Dual (±) |
10V~30V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
120 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
85Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
4pF 4pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
250ns, 120ns |
Charge Injection |
5pC |
Channel-to-Channel Matching (ΔRon) |
2 Ω (Max) |
Crosstalk |
-100dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Length |
19.175mm |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1995 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
85Ohm |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES WITH 10 V TO 30 V SINGLE SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
842mW |
MAX364CPE+ Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Through Hole. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to 0°C~70°C TA. 16 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. An electrical component like this is included in the 16 series. Multiplexers built on a SPST - NC switching circuit are built. The circuits in this analogue multiplexer number 4. If you are looking for variants of the digital switch, trying search with MAX364. This digital multiplexer has 85Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 24V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. There should be 10.8V voltage fed to the electrical part below 10.8V. The switch multiplexer may be damaged if it is exposed to voltage greater than 100pA. Despite this switch device's dual supply capability, its voltage should not exceed 20V. You should attach at least 4.5V voltage if you are using dual power supply. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. It can operate from 20V operating voltages. This electrical component also includes additional features such as ALSO OPERATES WITH 10 V TO 30 V SINGLE SUPPLY.
MAX364CPE+ Features
1 Channels
Switch Circuit: SPST - NC
Additional Features: ALSO OPERATES WITH 10 V TO 30 V SINGLE SUPPLY
MAX364CPE+ Applications
There are a lot of Maxim Integrated MAX364CPE+ Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Signal routing between systems
- Video switching
- Medical Instrumentation
- Battery-powered systems
- Avionics
- PBX interfaces
- High-Voltage
- Audio and video signal routing
- MP3 players