MAX364CSE+
| Parameters | |
|---|---|
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 85Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX364 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Power Supplies | 512/+-15V |
| Number of Channels | 4 |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 10.8V |
| Nominal Supply Current | 100pA |
| Max Supply Current | 100pA |
| Throw Configuration | SPST |
| Turn On Delay Time | 250 ns |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 120 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 85Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 4pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 250ns, 120ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -100dB @ 1MHz |
MAX364CSE+ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around 0°C~70°C TA. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. There are 16 pins injected into the electronic part body. Based on SPST - NC switching circuits, these analog multiplexers work. Try searching for the analog switch ic with MAX364 if you are looking for variants. Internally, this switch multiplexer has a resistance of 85Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 24V voltage to the switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 10.8V. The switch multiplexer may be damaged if it is exposed to voltage greater than 100pA. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 4.5V voltage attached. There are SEPARATE OUTPUT outputs on this analog switch ic. The electrical part can be operated at 20V voltage levels.
MAX364CSE+ Features
4 Channels
Switch Circuit: SPST - NC
MAX364CSE+ Applications
There are a lot of Maxim Integrated MAX364CSE+ Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Precision test equipment
- SONET/SDH ADM
- Automatic test equipment
- Precision data acquisition
- Medical systems
- Channelized and Unchannelized DS3 applications
- Ultrasound
- PDH Multiplexers
- Fiber In The Loop (FITL)
