MAX364EPE
| Parameters | |
|---|---|
| Supply Voltage | 15V |
| Base Part Number | MAX364 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | 512/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 10.8V |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 85Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 4pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 250ns, 120ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 120ns |
| Normal Position | NC |
| Length | 19.175mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 85Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATES WITH 10 V TO 30 V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
MAX364EPE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. In total, there are 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An electrical component like this is included in the 16 series. Circuits based on SPST - NC switching are used to construct these analog switch ics. A 4 circuit is present in this switch device. MAX364 can be used to search for analog multiplexer variants. There is 85Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 24V in normal situations. It is recommended to use 10.8V as the lowest voltage for the electrical part. Despite this switch's dual supply capability, its voltage should not exceed 20V. If you are using a dual power supply, you should attach at least 4.5V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATES WITH 10 V TO 30 V SINGLE SUPPLY.
MAX364EPE Features
1 Channels
Switch Circuit: SPST - NC
Additional Features: ALSO OPERATES WITH 10 V TO 30 V SINGLE SUPPLY
MAX364EPE Applications
There are a lot of Maxim Integrated MAX364EPE Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Industrial
- Modems
- Cross Connects
- Remote wireless modules
- Audio signal routing
- Medical Instrumentation
- DSLAMs
- Audio/video switches
- Digital access cross connects
