MAX365CSE+

250ns, 120ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE MAX365 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX365CSE+
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 963
Description: 250ns, 120ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE MAX365 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	85Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Base Part Number	MAX365
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	20V
Power Supplies	512/+-15V
Number of Channels	4
Max Supply Voltage	24V
Min Supply Voltage	10.8V
Nominal Supply Current	100pA
Max Supply Current	100pA
Throw Configuration	SPST
Turn On Delay Time	250 ns
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	120 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	9V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	250ns, 120ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	170ns
Drain to Source Resistance	50Ohm
Normal Position	NO
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX365CSE+ Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. There are 16 terminations totally. As a result of its 4 channels, this electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching for MAX365 variants of the analog switch ic. There is 85Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 24V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 10.8V. If you put voltage higher than 100pA on the digital multiplexer, damage may occur. Despite this switch device's dual supply capability, its voltage should not exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. It can operate from 20V operating voltages. This electronic component presents a Drain to Source resistance of 50Ohm.