MAX368CWN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX368 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 2mA |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 55pC |
| Channel-to-Channel Matching (ΔRon) | 180 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX368CWN Overview
The electrical component comes in 18-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to 0°C~70°C TA. In total, 16 terminations have occurred. The electronic part delivers high-quality output through its 8 channels. An 15V voltage supply should allow the electrical part to be turned on and run. There are 16 pins injected into the electronic part body. It consists of 1 circuits. Look for analog switch ic variants by searching with MAX368. It has an internal resistance of 1.8kOhm. Datasheets for 18 pin functions are available upon request. Analogue multiplexers of the Dual supply type that are cost-effective. For this digital switch to work, 2mA current would suffice. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. With dual power supplies, you should attach at least 4.5V. It can operate from 15V operating voltages.
MAX368CWN Features
8 Channels
2mA Supply Current
MAX368CWN Applications
There are a lot of Maxim Integrated MAX368CWN Analog Switches & Multiplexers ICs applications.
- ATM
- Channelized and Unchannelized DS3 applications
- Frame Relay Equipment
- Audio and video routing
- Signal routing between systems
- High-Voltage
- Battery-powered systems
- Battery Powered Systems
- Imaging
- DSLAMs
