MAX368EWN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX368 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 2mA |
| Throw Configuration | DPST |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 55pC |
| Channel-to-Channel Matching (ΔRon) | 180 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX368EWN Overview
Shipping overseas is convenient due to the electrical component's packing in 18-SOIC (0.295, 7.50mm Width). This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operating temperature extended to -40°C~85°C TA. There are 16 terminations totally. By its 8 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16 series. There are 1 circuits in this multiplexer. Try searching for the analog switch ic with MAX368 if you are looking for variants. Internally, this switch multiplexer has a resistance of 1.8kOhm. A cost-effective Dual supply type analogue multiplexer. It would be sufficient to run this analogue multiplexer with 2mA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. If you are using dual power supplies, you should attach at least 4.5V. 15V operating voltages can be used with this electrical part.
MAX368EWN Features
8 Channels
2mA Supply Current
MAX368EWN Applications
There are a lot of Maxim Integrated MAX368EWN Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- SDH/SONET multiplexers
- High speed data transmission line cards
- Power routing
- Relay Replacement
- Multiplexers
- Signal routing between systems
- Fiber to the Home
- Imaging
- Mechanical reed relay replacement
