MAX369CPN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Terminal Finish | TIN |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX369 |
| Pin Count | 18 |
| Operating Supply Voltage | 18V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 2mA |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 55pC |
| Channel-to-Channel Matching (ΔRon) | 180 Ω |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX369CPN+ Overview
The electrical component comes in 18-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexer and demultiplexer circuits have a number 4:1. Increasing operating temperature to around 0°C~70°C TA. In total, there are 18 terminations. Due to its 4 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. This electrical component is included in the 18 series of products. These analog multiplexers are built based on SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Try searching for the analog switch ic with MAX369 if you are looking for variants. Analog switches have 1.8kOhm internal resistance. Datasheets for 18 pin functions are available upon request. Digital switch that provides Dual power at a cost-effective price. 2mA current would be enough for this multiplexer to operate. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. You should attach at least 4.5V voltage if you are using dual power supply. There is a voltage range of 18V operating voltages for the electrical part.
MAX369CPN+ Features
4 Channels
Switch Circuit: SP4T
2mA Supply Current
MAX369CPN+ Applications
There are a lot of Maxim Integrated MAX369CPN+ Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Voice over IP/DSL – Integrated Access Devices, Smart
- Data switching
- Battery-powered systems
- Signal routing between systems
- DSLAMs
- Microprocessor controlled systems
- 65 V DACs
- Power routing
- Switching Systems
