MAX369EPN
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX369 |
| Pin Count | 18 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 2mA |
| Throw Configuration | 4PST |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 55pC |
| Channel-to-Channel Matching (ΔRon) | 180 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
MAX369EPN Overview
The electronic component is convenient to ship overseas because it is packed in a 18-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 4:1. Extended operating temperature around -40°C~85°C TA. In total, there have been 18 terminations. Due to its 4 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. There is an electrical component included in the 18 series. Multiplexers built on a SP4T switching circuit are built. There are 2 circuits in this switch device. Try searching for the analog switch ic with MAX369 if you are looking for variants. As far as internal resistance is concerned, it has 1.8kOhm. To find out what the 18 pins do, please refer to the datasheets. Analogue multiplexer with a Dual supply type that is cost-effective. An operating current of 2mA would be sufficient for this switch device. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. A dual power supply should have at least 4.5V voltage attached. Operating voltages range from 15V.
MAX369EPN Features
4 Channels
Switch Circuit: SP4T
2mA Supply Current
MAX369EPN Applications
There are a lot of Maxim Integrated MAX369EPN Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Remote wireless modules
- Signal routing between systems
- Fault Tolerant Systems
- Digital Cross-Connects
- Fiber In The Loop (FITL)
- Automotive applications
- Relay Replacement
- Modems
- Digital access cross connects
