MAX369EWN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8kOhm |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX369 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 2mA |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.8kOhm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 55pC |
| Channel-to-Channel Matching (ΔRon) | 180 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX369EWN+ Overview
The electronic component is convenient to ship overseas because it is packed in a 18-SOIC (0.295, 7.50mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. Operating temperature around -40°C~85°C TA extended. Totally, there are 16 terminations. By its 4 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. A SP4T switching circuit is used for these analog switches. Circuits number 2 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX369. In this multiplexer, the internal resistance is 1.8kOhm. Datasheets for functions of 18 pins are available. Digital switch that provides Dual power at a cost-effective price. In order to operate this switch device, it would need a current of 2mA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. The voltage should be at least 4.5V if you are using dual power supplies. The electronic component can function from 15V.
MAX369EWN+ Features
4 Channels
Switch Circuit: SP4T
2mA Supply Current
MAX369EWN+ Applications
There are a lot of Maxim Integrated MAX369EWN+ Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Precision instrumentation
- HDTV
- CSU
- Access Concentrators
- Private Branch Exchange (PBX)
- ATM
- Fault Tolerant Systems
- Audio and video routing
- Medical systems
