MAX378CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 3.5kOhm |
| Terminal Finish | TIN |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX378 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 1mA |
| Throw Configuration | DPST |
| Turn On Delay Time | 1 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3.5kOhm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns (Typ) |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX378CPE+ Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Through Hole. 8:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. A total of 16 terminations have been recorded. The electronic part provides high-quality output because it has 8 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. This electronic part can be found in the 16 series. The circuits in this analogue multiplexer number 1. MAX378 can be used to search for analog multiplexer variants. It has an internal resistance of 3.5kOhm. To find out what the 16 pins do, please refer to the datasheets. A analog switch ic that has a cost-effective Dual supply type. In order to operate this switch device, it would need a current of 1mA. If put voltage greater than 18V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 4.5V. 15V operating voltages are supported by the electronic component.
MAX378CPE+ Features
8 Channels
1mA Supply Current
MAX378CPE+ Applications
There are a lot of Maxim Integrated MAX378CPE+ Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- PDAs
- SDH/SONET multiplexers
- Cable PC
- Multiplexers
- DVD-R
- Intelligent PBX
- SONET
- FTTH
- New designs requiring multiplexer functions
