MAX378CWG+
| Parameters | |
|---|---|
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX378 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 3.5kOhm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns (Typ) |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
MAX378CWG+ Overview
As the electronic part is packed in 24-SOIC (0.295, 7.50mm Width), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. The operating temperature is extended to around 0°C~70°C TA. In total, there have been 24 terminations. By its 8 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. A total of 24 pins are injected into the body of the electronic part. There are 1 circuits in this switch device. Try searching with MAX378 if you're looking for variants. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. In order to power the analogue multiplexer, it requires an input voltage of 4.5V volts.
MAX378CWG+ Features
8 Channels
MAX378CWG+ Applications
There are a lot of Maxim Integrated MAX378CWG+ Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- Data switching
- Ultrasound
- Multiplexers
- Video signal routing
- Modems
- PCMCIA cards
- Digital cross connects (DSX-1)
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- PDH Multiplexers
