MAX378EPE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 3.5kOhm |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX378 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 1mA |
| Throw Configuration | DPST |
| Turn On Delay Time | 1 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3.5kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX378EPE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a number of circuits 8:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 8 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. The electronic part body is injected with 16 pins. There are 1 circuits in this multiplexer. Try searching for the analog switch ic with MAX378 if you are looking for variants. There is 3.5kOhm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. A cost-effective Dual supply type analogue multiplexer. An operating current of 1mA would be sufficient for this switch device. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. When using dual power supplies, you should attach at least 4.5V. The electronic component can function from 15V.
MAX378EPE Features
8 Channels
1mA Supply Current
MAX378EPE Applications
There are a lot of Maxim Integrated MAX378EPE Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Low-Voltage
- Channel Banks
- Fiber to the Home
- Microprocessor Controlled Analog Systems
- Data switching
- Digital Cross-Connects
- DSUs
- PCMCIA cards
- 65 V DACs
