MAX378MJE/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1995 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 3kOhm |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3kOhm |
| Min Dual Supply Voltage | 4.5V |
| Screening Level | MIL-STD-883 Class B |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 750ns, 500ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX378MJE/883B Overview
Presented in 16-CDIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. In Through Hole, this analog switch is mounted. There is 8:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -55°C~125°C TA are extended for operation. In total, there are 16 terminations. A electrical component with 8 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. Circuits number 1 make up this analogue multiplexer. Analog switches have 3kOhm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 18V. With dual power supplies, you should attach at least 4.5V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER.
MAX378MJE/883B Features
8 Channels
MAX378MJE/883B Applications
There are a lot of Maxim Integrated MAX378MJE/883B Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Remote wireless modules
- Voice over IP/DSL – Integrated Access Devices, Smart
- Automotive applications
- Battery Powered Instruments
- SONET/SDH ADM
- Wireless Local Loop
- Precision instrumentation
- High reliability control systems
- ATM
