MAX379CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX379 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Supply Current-Max (Isup) | 1mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 3.5kOhm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 19.175mm |
| RoHS Status | ROHS3 Compliant |
MAX379CPE+ Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Through Hole position. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 16 series of products. On the other hand, analog switches can be constructed using SP4T switching circuits. The circuits in this analogue multiplexer number 2. Try searching with MAX379 if you're looking for variants. Multiplexer or Switches is a typical switch device. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. To power the multiplexer ics, the voltage must be set at 4.5V.
MAX379CPE+ Features
4 Channels
Switch Circuit: SP4T
MAX379CPE+ Applications
There are a lot of Maxim Integrated MAX379CPE+ Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Precision data acquisition
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Low-Voltage
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Microwave transmission systems
- Wireless Local Loop
- Automatic test equipment
- Remote Powered Equipment
- Data switching
