MAX379CPE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 3.5kOhm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX379 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 1mA |
| Throw Configuration | 4PST |
| Turn On Delay Time | 1 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3.5kOhm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX379CPE Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Through Hole. 4:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around 0°C~70°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 16 pins. Multiplexers built on a SP4T switching circuit are built. 2 circuits are used in this analogue multiplexer. MAX379 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 3.5kOhm. The functions of 16 pins can be found in the datasheets. Digital switch that provides Dual power at a cost-effective price. This multiplexer would work with 1mA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. For dual power supplies, a voltage of at least 4.5V should be attached. A voltage of 15V can be used to operate the electronic component.
MAX379CPE Features
4 Channels
Switch Circuit: SP4T
1mA Supply Current
MAX379CPE Applications
There are a lot of Maxim Integrated MAX379CPE Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- PDH Multiplexers
- Medical systems
- ATM
- Cable PC
- Audio/video switches
- Modems
- Cross Connects
- PBXs
- Fiber In The Loop (FITL)
