MAX379CWG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 3.5kOhm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX379 |
| Pin Count | 24 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 1mA |
| Turn On Delay Time | 1 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3.5kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX379CWG Overview
Due to its 24-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around 0°C~70°C TA. The total number of terminations is 24. By its 4 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. As part of the design of the 24 series, this electronic part has been incorporated into the system. The analog switch ics are built using SP4T switching circuits. This multiplexer is composed of 2 circuits. Search with MAX379 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 3.5kOhm. To find out what the 24 pins do, please refer to the datasheets. Analogue multiplexer with a Dual supply type that is cost-effective. An operating current of 1mA would be sufficient for this switch device. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. If you are using dual power supplies, you should attach at least 4.5V. There is a voltage range of 15V operating voltages for the electrical part.
MAX379CWG Features
4 Channels
Switch Circuit: SP4T
1mA Supply Current
MAX379CWG Applications
There are a lot of Maxim Integrated MAX379CWG Analog Switches & Multiplexers ICs applications.
- Mechanical reed relay replacement
- PBX interfaces
- Residential Gateways, Home Gateway/Router
- Cell phones
- Avionics
- E1 Network Equipment
- Avionics test equipment
- Audio and video routing
- Microwave transmission systems
- Digital cross connects (DSX-1)
